Skip to content

Servicing Cost

Aircon Servicing Price per Unit: How Multi-Unit Pricing Works

How per-unit aircon servicing prices fall as unit count rises, with worked examples from a dated published price list, before GST.

4 min read Last updated
Three wall-mounted split aircon units across an open-plan HDB living and dining area

How the tiers work

The aircon servicing price per unit in Singapore falls as you add units at one address. The first unit carries the cost of the visit itself: travel, set-up, ladders and clean-up. Each extra unit adds less, because the technician is already there.

That’s why the aircon servicing cost per unit drops from $50 to $16 across the tiers. For the full price picture, see the Aircon Servicing Cost section.

The examples below use Billy Aircon’s published price list for wall-mounted split units, read on 16 November 2026. All prices are before 9% GST and apply to one home at one address.

Technician's step ladder under a bedroom aircon with filters laid on a towel

Units at one addressTotal before GSTWorks out per unit
1$50$50.00
2$55$27.50
3$70$23.33
4$85$21.25
5$100$20.00
6$115$19.17
7 to 9$18 per unit$18.00
10 or more$16 per unit$16.00

The second unit is the big step. It costs just $5 more than the first, so two units come to $55 instead of $100.

Worked examples

Here’s what the multi unit aircon servicing price looks like for four common Singapore homes. Each one also shows what you’d pay if every unit were charged at the single-unit $50 rate.

A three-room HDB flat with a System 3. One outdoor unit feeds three indoor units, so that counts as three units. The aircon servicing 3 units price is $70 before GST, or $76.30 with 9% GST. At $50 each, the same job would be $150.

A four-room flat with a System 4 and one extra unit. That makes five indoor units in total, so the price is $100 before GST ($109.00 with GST). It’s $150 less than five single-unit visits at $50.

A landed home with eight wall-mounted units. Eight falls in the 7 to 9 band, so 8 x $18 = $144 before GST ($156.96 with GST). At $50 each, you’d pay $400.

A large home with twelve wall-mounted units. Twelve is in the 10-plus band, so 12 x $16 = $192 before GST ($209.28 with GST). The single-unit rate would give $600.

Notice the jump from 6 units ($115) to 7 units (7 x $18 = $126). The seventh unit adds $11, still more than the $15 the sixth unit added… no, less, so the total keeps climbing at a gentle pace. At the top of the 7 to 9 band, nine units cost $162, while ten units cost $160 (10 x $16). That’s a small quirk of the bands, not a mistake.

Count indoor units, not systems

Servicing is counted by indoor units. A multi-split system with one outdoor unit and three indoor units is three units.

The conditions that come with the price

A per-unit price only means something with its conditions attached. On the list we cite, four apply:

  • One home, one address. You can’t add your units to your parents’ flat to reach a cheaper band. Each address is priced on its own.
  • Wall-mounted split units only. Ceiling cassette, ducted and commercial systems are quoted separately.
  • Possible surcharges. Extra charges may apply for CBD jobs and for jobs starting from 6pm.
  • Outdoor unit cleaning. This is charged separately.

Landlords with more than one flat should note the first rule. Two rental units at different addresses mean two separate bills, each starting at the top of the table.

The extra charges and GST guide explains each condition in detail.

Handwritten tally of aircon units per room on a notepad on a kitchen counter

Why separate addresses are priced separately

Each address means a separate trip, a separate set-up and separate access arrangements. The per-unit saving comes from doing several units in one visit.

Two addresses are two visits, even on the same day. So the tiers start again at the first unit. For example, 3 units at one address cost $70, but 2 units at one address plus 1 at another would cost $55 + $50 = $105.

Getting an accurate price

Walk round the home before you ask any company for a price. A few minutes with a notepad avoids most quote surprises:

  1. List each indoor unit by room and type.
  2. Flag any ceiling cassette or ducted units, since these are quoted separately.
  3. Ask for a written quote that states the unit count, the job, the GST status and any surcharge.
  4. Check the unit count on the quote against your own list.

The how to read a quote guide shows what a clear quote looks like. You can also use the cost estimator for a quick figure before and after GST.

When to call a technician

Book a service when your units are due on your usual schedule, or as soon as a symptom appears. Weak cooling, drips and a smell are the usual signs.

If you have several units, servicing them all in one visit is the cheapest way to use the per-unit tiers. Ask for every unit to be listed on the receipt, so the count on the bill matches the count in your home. Then use the cost estimator to check your total before you book.

Questions readers ask

Is 3 units cheaper per unit than 1?

Yes. On the published list we cite, 1 unit is $50 while 3 units are $70 in total, which works out to about $23.33 per unit. Both are before 9% GST, read on 16 November 2026.

Can I combine units at two addresses?

No. Multi-unit prices apply to one home at one address. Units at a second address are priced as a separate job.

Are ceiling cassette units included?

No. Ceiling cassette, ducted and commercial systems are quoted separately rather than on the wall-mounted tiers.

Back to the section

What servicing, chemical cleaning and gas top up cost, how per-unit pricing works and what GST and surcharges add.

Learn more about Aircon Servicing Cost