Skip to content

Servicing Cost

Aircon Troubleshooting Fees Explained

What an aircon troubleshooting fee covers, why the repair is priced separately, and a dated example: $40 standard, $50 advanced before GST.

3 min read Last updated
Technician's torch pointed at an open indoor aircon unit while the homeowner watches from the doorway

What the fee is for

The aircon troubleshooting fee in Singapore pays a technician to find out why your unit is misbehaving. It covers the visit, the testing and the explanation, not the repair itself.

A unit blowing warm air could have a dirty coil, a failing fan motor, a refrigerant leak or a fault in the outdoor unit. Finding out which takes time, tools and know-how. For other costs, see the Aircon Servicing Cost section.

As a dated example, Billy Aircon’s published list, read on 16 November 2026, shows a troubleshooting fee of $40 standard and $50 advanced, before 9% GST. With GST, that is $43.60 or $54.50.

Other Singapore companies list their diagnosis or checking fee at around $60 to $80, so the price depends on who you call. Only GST-registered businesses have to add the 9%, so ask whether the quote you’re given already includes it.

Diagnosis vs repair

Diagnosis and repair are two separate steps, and you only pay for the repair once you agree to the quote:

  1. Diagnosis. The technician checks the unit, finds the cause and explains it.
  2. Repair quote. The technician quotes the repair. You decide whether to go ahead.

Keeping them separate is fair to both sides. You know what you are paying for before any parts are replaced, and you can get a second quote for a large repair.

Aircon remote control and a written fault note on a bedside table

StepWhat you getWhat you pay
TroubleshootingThe cause, explainedThe fee, standard or advanced
Repair quoteA price for the fixNothing until you agree
RepairThe work, with a warrantyThe quoted repair price

Some companies deduct the diagnosis fee from the final bill if you go ahead with their repair. Others keep it as a separate charge, so it’s worth asking before the visit.

Standard or advanced?

Companies with two tiers usually charge the standard fee for common checks and the advanced fee when the fault needs more testing. Think of a weak cooling complaint as standard, and a unit that trips, leaks or won’t start as more likely advanced.

Before you book, ask:

  • Which tier applies to the fault you’ve described?
  • What happens if the technician finds the problem is simple, such as a clogged filter?
  • Is the fee waived or credited if you proceed with the repair?

Do the safe checks first

A good share of call-outs end with something an owner could have found in two minutes. Before you pay a troubleshooting fee, check:

  • The remote is in cool mode with a sensible temperature.
  • No breaker has tripped. Look at the board only; do not open any electrical part.
  • The filters are clean.
  • The outdoor unit’s fan is turning and nothing blocks it, seen from inside the home.

The safe checks guide has the full list, and what to note for the technician.

If you manage a rental, ask your tenant to send a short video of the fault and the remote display. That helps the technician pick the right tier and saves a wasted trip.

Technician showing a homeowner a phone photo of a faulty aircon part

What to ask for after diagnosis

Ask for a clear explanation and a written quote before you agree to any work. These five items cover it:

  • The cause, in plain words.
  • A photo of the faulty part or the problem, if possible.
  • A written repair quote, before or after GST stated.
  • Whether the troubleshooting fee is credited against the repair, if you go ahead. Some companies do this; ask.
  • The warranty on the repair.

If the diagnosis is a refrigerant leak, ask whether the quote covers finding and fixing the leak or only a top up. See gas top up vs leak repair.

When to call a technician

Call when a fault remains after the safe checks: warm air with clean filters, water that keeps dripping, a new noise, a burning smell or ice on the pipes. For a burning smell, buzzing or sparking, switch the unit off at once and leave it off until it has been checked.

Before you book, confirm the aircon troubleshooting fee, which tier applies and whether GST is included. Get the answers in writing, by message if you can, so the final bill holds no surprises.

Questions readers ask

Does the troubleshooting fee include the repair?

No. The fee covers diagnosis. The repair is quoted separately after the technician finds the cause.

What is advanced troubleshooting?

A higher diagnosis tier for faults that take more checking. On the published list we cite, it is $50 before GST, compared with $40 for standard.

Can I avoid the fee?

Sometimes. Do the safe checks first. Some problems turn out to be settings, a tripped breaker or a clogged filter that you can sort out without a visit.

Back to the section

What servicing, chemical cleaning and gas top up cost, how per-unit pricing works and what GST and surcharges add.

Learn more about Aircon Servicing Cost