Skip to content

Chemical Wash & Overhaul

Chemical Wash vs Chemical Overhaul: Dismantle or Not?

Non-dismantle chemical wash vs full-dismantle overhaul: what each reaches, when dismantling matters, and dated prices before GST.

3 min read Last updated
Aircon indoor unit fully dismantled with parts laid on newspaper on a service balcony floor

The one difference that matters

In a chemical wash vs chemical overhaul choice, the only real question is whether we take the indoor unit apart. A wash leaves it on the wall. An overhaul dismantles it.

Time, price and how much gets cleaned all follow from that. For the bigger picture on deep cleaning, see our Chemical Wash and Overhaul section.

What a chemical wash reaches

A chemical wash reaches the coil well and much of the blower, but not every hidden corner. The unit stays on the wall the whole time.

Here is how a wash runs:

  • The technician removes the front cover and filters.
  • A catch bag goes on, and the wall and floor are protected.
  • Cleaning solution goes onto the evaporator coil and through the blower wheel.
  • Both are rinsed, and the drain pan is flushed from above.

It cannot fully reach the back of the blower wheel, the inside corners of the drain pan, or build-up behind fixed parts. That gap is why a musty smell can come back after a wash.

Indoor aircon unit still on the wall with a catch bag fitted for an in-place wash

What a chemical overhaul reaches

A chemical overhaul reaches every surface, because the parts come out of the unit. The covers, blower wheel, drain pan and other removable parts are taken off, soaked in cleaning solution and scrubbed. This often happens in a service yard or on your balcony.

The coil is still cleaned in place. Then everything is dried, refitted and test run.

Heavy mould on the blower and thick slime in the drain pan come off properly this way. Most HDB flat owners with a multi-split system will notice one practical point: you need a spot for the washing, so tell the technician about your space beforehand.

The step-by-step is in what happens during a chemical overhaul.

Aircon drain pan removed and held over a basin, showing slime build-up

Side-by-side

The table shows where the two methods split. The coil is treated the same way in both, so the gap is in the blower and the drain pan.

Chemical washChemical overhaul
Unit taken apartNoYes
CoilCleaned and rinsed in placeCleaned and rinsed in place
Blower wheelRinsed in place, back hard to reachRemoved, soaked, scrubbed
Drain panFlushed from aboveRemoved, soaked, scrubbed
Time on siteLonger than servicingLongest
Space neededUnder the unitUnder the unit plus a washing area
Published price per unit (before GST)$80 to $100$130 to $180

Prices are from Billy Aircon’s published list, read on 16 November 2026. All are before 9% GST, which has applied in Singapore since 1 January 2024. Other providers can quote higher for larger units, and some show GST-inclusive prices, so check which one you are being given.

See chemical wash and overhaul prices for what moves a job within the range.

When the dismantling step matters

Choose an overhaul over a wash when the build-up is beyond what rinsing in place can reach. These are the signs we look for:

  • The blower wheel has a heavy black coating, not just spots.
  • A musty smell came back after a chemical wash.
  • The drain pan keeps clogging and overflowing.
  • The unit has gone a very long time without any cleaning.

A wash is usually enough when build-up is moderate, the smell is mild, or the unit has been serviced fairly regularly. Many Singapore providers suggest a wash roughly every 12 to 18 months and an overhaul every two to three years, though your own unit’s symptoms matter more than the calendar.

Landlords should note one thing. A drain pan that keeps overflowing can leave water stains on ceilings or floors, and that is a tenant complaint you want to avoid.

Decision table

Find the row that matches what you see, hear or smell. If two rows fit, go with the heavier option.

Your situationLikely choice
First deep clean, moderate smell or spottingChemical wash
Smell returned after a recent washChemical overhaul
Heavy mould visible on the blowerChemical overhaul
Coil clogged, blower fairly cleanChemical wash
Recently serviced, no symptomsNeither, keep to general servicing

If you are told your unit needs an overhaul and you are not sure, the guide on checking an overhaul claim explains what evidence to ask for.

When to call a technician

Call us when a general service has not cleared a smell, weak airflow or visible build-up. Ask which method the technician recommends and why, and ask for photos of the blower and drain pan.

Get the price per unit in writing before work starts. That one step settles most disputes about wash vs overhaul before they begin.

Questions readers ask

What does dismantling add?

Access to parts that a wash in place cannot fully reach, such as the far side of the blower wheel and the inside of the drain pan. They can be soaked and scrubbed separately.

Which takes longer?

The overhaul, because parts come off, are washed and dried, and then the unit is reassembled and test run.

Which costs more?

The overhaul. On Billy Aircon's published list, read on 16 November 2026 and before GST, an overhaul is $130 to $180 per unit and a chemical wash is $80 to $100 per unit.

Back to the section

What each deep-cleaning method does, when a unit needs it and when it does not.

Learn more about Chemical Wash and Overhaul